Removing Formstone from a RowHome Part 2 of 2 (Behind the Building Edition)
As I mentioned in what ended up being the first part of this article, I know it (this information) may only be of real benefit to the folks in and around Baltimore, Maryland. And while I have been working to get away from the more personalized, “progress not perfection,” journal-type entries (all the time), this is one case where, well, I am still going to indulge myself. You’ll find part one of this article here >> Removing Formstone from a Baltimore Rowhome. Thanks and enjoy. ~jb
My wife, Jenny — then girlfriend, and I had headed off to Colorado before I had a chance to see the property that she had recently purchased. And not to go too much into how our relationship kicked off, I will tell you that Jenny and I ended up in California, and she ended up managing her first home, as a rental property, from three thousand miles away.
In 1997, Baltimore’s waterfront still hadn’t fully experienced its revitalization. This house sat innocently enough in the community called Canton, just a few blocks up from the water on the east side of Baltimore’s Inner Harbor. The two-story, end-of-group rowhome was clad with what John Waters called “the Polyester of Brick” . . . what we Baltimoreans generally know as formstone.
I do tend on the side with those that think it is “historically significant.” But while I have seen many fine examples of it both bare and/or painted, it didn’t take long to realize that for *our* first property — this formstone had to go. The removal of it remained on our to-do list for, well, a long time. Through the years though, we had received a handful of verbal estimates on that project. I have to admit even me working “around” construction, it was difficult finding (let alone getting a callback from) anyone that specialized in the removal of this material.
Formstone, I have come to know as a sort of stamped stucco, was applied primarily to the face of homes between the 1940s and the 1960s. There was nothing to indicate that we were any different in that regard. Wire mesh was laid over the facing brick and this concrete-like substance was colored, applied, and stamped (maybe not necessarily in that order). While I knew removing it probably wouldn’t be a big deal, it was dealing with what’s left underneath that frightens . . . most. We knew we needed a mason.
We finally found ours in early 2011. An old friend of Jenny’s, reunited through Facebook, was our guy. He works for a larger general contractor (almost primarily on commercial projects), and he agreed to (no, he was anxious to) do this project for us. His quote — $3400, and a couple of weeks in the middle of summer. He planned to remove the formstone and simply re-point the brick that remained. Jenny and I had our doubts that it would be that easy.
From the time she purchased the property, this faux stone had been buckling at right about the midpoint. When a structural engineer had a chance to look a few years back, he suggested that there were potentially clips from an old awning pushing the formstone outward. We in fact confirmed later that the property was used as a butcher’s shop during some part of the last century.
What we found in the end was just a little different than what that structural engineer and our mason both expected. And while we had braced ourselves over the years for the worst, and you figure with all that time… we would have set aside just a little more of it . . . to develop “contingencies.” HaWell! Not so much.
Of course, we did have a rough idea, and I say that if we were “rehabbing” this property, we may have taken the time to look at (re)building out a storefront-type window at the first floor. But alas, for a rental, a simple window swap out and a new (unassuming) brick façade would do. Our guy felt any sort of trade-out like this would amount only to a marginal change in cost.
I think I was happy enough with the project as a whole, despite minor difficulties with staying on pace. We ran into our biggest trouble however when our guy (who was nice enough to work with and yes, I would still use again) brought in a carpenter (friend) for the window work. (I had put myself through the paces trying to find affordable windows that would end up staying somewhat in scale, while still working with what I have doing on the interior.)
I believe (I hope) this carpenter did a good enough job installing them — he was monitored, after all, by our guy. And I didn’t really have a problem with any of that. Rather it was the fact that we allowed that work to then lead to . . . all too improvised cornice work . . . and, well, I think I will stop myself about there.
Needless to say, and as this is not the type of project that most people (including me) do every day, I learned a lot. This project did give me the opportunity to toy again with shooting video . . . for the DAP Seal Your Home and Win Blogger Challenge. (Not the highest quality, I was hot and sweaty, and I took limited post production time before I posted it, but I did include below.)
I learned again (and is that really learning?) that soooo much communication goes into working on even a moderately-sized project with another party. And I learned . . . it is of absolute importance to be on site, well, as. much. as. possible. always.
Total costs (if you were curious):
- $265 construction and scaffolding permits
- $300 for 20 yard, concrete-only dumpster
- $745 for masonry material — approx. 9 strap of brick + lintels, mortar, stone
- $400 two new construction windows, two exterior lights
- $400 miscellaneous construction material – plywood, framing, drywall, fasteners, insulation, caulk, paint, blinds and such
- $400 Carpenter for re-framing, window and drywall install
- $290 A total waste of money … aka Carpenter buy out money
- $3475 Mason for removal formstone, clean, repair and repoint of existing brick. Install one story brick façade.
I also took the time to load up a full array of pics for a slide show of this project, but heck, it looks like Google pulled a fast one on me and I can’t seem now to find my Picasa Web Albums. Instead I’ll point you over to my Google + Page . . . these images are now, well, integrated there >> https://plus.google.com/photos/107409173638580644283/albums/5683514291797942577.
Thanks for reading and happy hump day. ~jb
About Building Moxie
BuildingMoxie.com is the do-it-together blog about house, home, and neighborhood (or 'hood for short), ... we feature a variety of topics written by, and for, both the diyer and the pro. ... Maybe you?
Hi & Welcome!
Find Building Moxie Also On:
- Removing Formstone from a RowHome Part 2 of 2 (Behind the … | InnerHarbor.com
- Working with Aluminum Coil Stock & the Cornices of Baltimore
- Don’t Be Alarmed, Nothing to See Here :: Connecting and Troubleshooting a Hard Wired Security System
- DAP 3.0 Review :: Caulking Wood Siding at a Chimney
- Building Moxie in a Bagster Bag :: the 2012 Year in Review … Finally, OR …
- Building a Birdhouse from Scrap Cedar (aka … SubTitle :: Do It Yourself with a Friend is Twice as Nice)
- Building Moxie Builds a Birdhouse with Beth of Beth’s DIY Workshop for the Baltimore Bloggers Holiday Party 2013 (Now, Say that 3 Times Fast)
- One Resolution = More Resolution :: Bonus Title: Christmas in Baltimore, Epilogue
- Christmas in Baltimore :: Mrs Moxie & Her New Ceramic Climbing Cat
- Building Moxie Does Electrical Work :: Adding a Sub-Panel, Installing Exterior Outlets & Hooking up Smoke/Carbon Monoxide Detectors
- Fall DIY Projects Roll On :: 3 More Products 3 More Projects (Well I Guess Actually 2)
- Building Moxie with Elizabeth CB Marsh :: Working with a Baltimore Firm & Working with an Interior Designer
About jb bartkowiak (259 posts)
A one-time construction manager, and always handyman, turned blogger and editor. My wife, Jen, and I are on our 6th property (. . . yes, together). She is a real estate agent. We have two beautiful daughters Evyn and Eva. We currently live and are restoring an 1889 farmhouse in Baltimore's Lauraville area.