Last Minute Holiday Gift Ideas :: Top Ten Tools
Note from the hosts: The brothers Paul and Dave of Hamtil Construction write — “we frequently are asked to weigh in on tool decisions for friends and family.” Well, right around the time that I posted this on the ten essential tools for homeowners, I became friendly with Paul Hamtil, the voice behind @HamtilConst.
When I eventually asked Paul to do a post for us, I suggested “the 10 essential contractor tools.” While that post has not yet come to pass, this instead will do nicely. Just in time for your last, last minute Christmas shopping, the guys posted this on their Hamtil Construction Facebook page last week. I asked if I could re-print, and they agreed.
I thought it was interesting though that our two “top ten tools lists” shared absolutely zero entries in common. Cheers, Happy Holidays and Enjoy. ~jb
Given that we pack an arsenal of tools for our work, we frequently are asked to weigh in on tool decisions for friends and family. In the spirit of the holidays, we want to present a gift of our “top ten tool picks” for the DIY’er or handyman/ woman on your list. Ahh, yes.. if we had the money we would buy all the tools we can get our hands on! Since we can’t, here are a few essentials that won’t break the bank.
Happy shopping, and we wish you a wonderful holiday season!
Tape Measure: A helpful hint when talking tape measures is that the “standout” is pretty important. That’s how far you can extend it before it goes limp and falls to the floor. This can be really frustrating, so a 9’ min standout is suggested. 25’ tapes are suggested, and for the mathematically challenged there are versions with fractions listed!
Cordless Drill: Because they range in volts, sizes, and quality, choosing a drill can be tough. Most pros will use an 18volt drill at the minimum. For a homeowner and less frequent user, we say that fewer volts are OK. 12v or 14.4v should suffice for typical needs. A caution, however, is that if you already have cordless battery tools you may want to match the brand and voltage of batteries to stay universal. Also, while a 12v or 14.4v tool is less expensive, if you want to step up to a combo pack or introduce a saw to your collection later, going with 18v may be a smart move.
Screwdriver set: The cornerstone of any toolbox, a set of good screwdrivers will be an almost sure go-to for most projects. This holiday is the perfect time to upgrade from those old, dull ones that grandpa gifted to your DIY’er. We always recommend a multi-piece set by Craftsman. When they get dull or break, you’ll be thankful for the no-questions-asked warranty!
Headlamp: After recently witnessing our Heating & Cooling contractor using a headlamp in a dark basement while he worked on a duct, we thought it was brilliant idea! Remove the light holding burden and free up those hands to get down and dirty.
Laser Level: Sounds like a serious tool, but actually there are many inexpensive versions of laser levels for use around the home. To free up your hands when working solo, and so you don’t have to buy 4 different lengths of levels, this is a great tool. It will be useful for hanging pictures, painting stripes, tile install, and more!
Circular Saw: Likely to be the most useful saw for a variety of projects, a circular saw is a good addition to any tool collection. While it’s not necessary to buy the top of the line, there are a few benefits worth paying a little more for. One is “blade brake”, which will increase safety by quickly stopping the blade when the trigger is released. Another is “levers” in lieu of “knobs” to adjust the blade settings. Levers are simply easier.
Ladder: After witnessing so many bad ladders over the years, this is one area that needs some attention called to it. Spending a few bucks on a solid ladder is a wise investment! Little Giant makes an excellent ladder (yet somewhat pricey) that can be set up in many configurations, making it versatile- yet compact. A top choice for homeowners!
5-in-1: This super handy tool will scrape, gouge out old paint or caulk, open a paint can, and more! To take it up a notch, Hyde Tools also makes a 10-in-1. This is a new variation of the traditional tool which includes a screwdriver and bit assortment in the handle.
Clamps: Clamps are always a welcome present to a DIY’er! When fixing that broken furniture or building a new woodworking project, clamps are essential. Try a 4 clamp assortment pack by Quick Grip for starters. Throw in a Vice Grip for good measure and you’ll have it covered!
Smartphone (or just the apps): Is this really a top ten tool? Well, in today’s world… absolutely! How can anyone survive a project without a calculator app, YouTube links at our fingertips, and the camera ready to snap those finished project photos? (Or, to snap photos of broken stuff to bring along to the hardware store so we don’t have to explain what the thingamabob is).
Another note from the hosts: If these ideas don’t quite suite your needs, may I suggest one of these other fantastic gift guides … check ‘em:
Oh and what’s your pick or gimme? Leave a note below. Thanks for Reading. ~jb
About Building Moxie
BuildingMoxie.com is the do-it-together blog about house, home, and neighborhood (or 'hood for short), ... we feature a variety of topics written by, and for, both the diyer and the pro. ... Maybe you?
Hi & Welcome!
Find Building Moxie Also On:
- Updates, Happening’s, and some Festive Cheer for all… | The HTRC: Homeowner's & Trades Resource Center
- 2013 Holiday Gift Guides RoundUp :: Building Moxie
- Building Moxie’s 2013 Parade of ToolBelts
- 4 Smart & Stylish Bike Storage Options
- A Ho Ho Holiday To Do & the Gift of Do it Yourself
- Giving the Gift of Gift Guides :: 2013 Holiday Gift Guides RoundUp
- PVC 101 :: What to Know about Using PVC for DIY Projects
- Installing In Patio Landscape Lighting || Even More Patio Project Progress, aka …
- Happy Halloween from Building Moxie and Friends || Real Life DIY Halloween Decorating Inspiration
- $0 DIY Security Bars || Basement Window Redo
- DIY Oil Change :: Why DIY? With #PurolatorKeepItPure
- Baltimore DIY Guide on Charles & Hudson
About HamtilConst (3 posts)
Paul Hamtil resides in St. Louis, MO and along with his brother David, owns and operates Hamtil Construction LLC. When not working on a remodeling project, Paul enjoys hanging out with his wife and 2 boys. On weekends, look for him in the woods, in a stream, at the grill, or in the garden.